Mini Lipstick Mold Product Wholesale - Beyer Machinery
Brand Name:
Beyer
Delivery Time:
3-30 working days depends on quantity
Accept Custom Service:
Yes
Certification:
CE / SGS
1-Year warranty:
Access to free parts replacement during one year.
Product details of the mini lipstick mold
Product Introduction
All shapes of mini lipstick mold can be adjusted according to customers' demands. The functions of Beyer Machinery product can meet and exceed customer expectation. The establishment of customer service is conducive to the development of Guangzhou Beyer Machinery Equipment Co.,Ltd.
product Application
It is used for lipstick filling and shape forming. lipstick shape can be customized according to customer's requests.
0 (2)
Product Features
● Lipstick molds are custom-made.stand size 12.1mm*27 in stock .
● Materials: Germany aluminium, durable.
● Lipstick mold quotation, according to the shape ,size and samples(description) from customers provided.
● The lipstick mold cavity numbers are: 6,8,12,48,72,96 or 100 cavities, usually do 12 cavities.according to customer’s need .
● Production time for 12 holes lipstick mould is usually 7 days,15 days for 48/72/96/100 holes.
● Moulds can be used by manual or applied on any types of filling machine.
● Made by qualified aluminum, ensure the glossy and smoothness and life of the molds.
● Mold can print customer’s logo, according to customer’s requirements.
● Optional: Upper Mold Remover is to remove the upper mold easier.
Steps for lipstick production:
● Lipstick three roll mill.
● Lipstick Dissolving mixing Tank. Then defoaming if needed.
● Doulbe Tank OR 12cavities Lipstick Filling Machine.
● Cooling Tunnel.
● Manual removing mould or Air Blowing Type Lipstick Mould Remover.
Advantages:
● Solid,durable,anti-abrasion,
● Easy to clean, use and maintain.
● 1 Year Warranty ( Free repair service )
Product Details
332 拷贝
639c7eb844eaa04f40260b4c2554169 拷贝
How to use lipstick mold and make lipstick
639c7eb844eaa04f40260b4c2554169 拷贝
1. Disassemble The Mold
Familiar with the structure, take out the top mold by two hand from two end of the mold, unscrew three screws below, separate bottom mold into two parts.
639c7eb844eaa04f40260b4c2554169 拷贝
2. First Time Using
Put in cosmetics oil or olive oil soak for 1-2 hours, and then wipe the mold with a cotton swab to keep the mold dry, can not wipe too hard , because the force wipe easy to make the mold turn black. PS-Please avoid touch with water it cause damage the surface of aluminum, If you are not careful and touch with water please take dry soft cloth wipe it immediately.
639c7eb844eaa04f40260b4c2554169 拷贝
3. Filling Liquid
Pour liquid into the mold, make sure three screws are tight enough.
639c7eb844eaa04f40260b4c2554169 拷贝
4. Cooling Time
Waiting for 30 minutes, in refrigerator can be cooled for 20 minutes, after lipstick become
solid, take a flat spatula to remove the extra solid.
639c7eb844eaa04f40260b4c2554169 拷贝
5. Release Mold
For a new user recommend buy a separate stripper that is a part assist mold release, prevent the filled lipstick go up with top mold, put stripper on back of filled lipstick and press slightly.
639c7eb844eaa04f40260b4c2554169 拷贝
6. Take Out Filled Lipstick
Twist the lipstick inside cup out, alignment inside cup to the lipstick then push down little
by little until push down to bottom. Loose screw on side of the mold, then slightly pull out the lipstick tube.
You will see perfect glossiness finish product!
Use Direction
● Put oil on mould to avoid any scratching which will show up on all your lipsticks.
● Assemble upper mould and lower mould and fix them by screws.
● Fill liquid raw material into the mould holes.
● Freeze it in fridge to paste about 30 minuets.
● Use scraper to remove the residue.
● Gently take out the upper mould or lipbalm tubes (you can also use a mould release to avoid breaking the sticks).
● Use a lipstick casing to absorb the paste in. Twist the stick down into the case.
● Finished.
Care instructions
● Soak the mold set with white electric oil for 12 hours before using.
● Clean with a lightly oiled rag, never run under water. If mold gets wet, dry thoroughly.
● Don't insert any tools in the cavity that could scratch it. The scratch will show up on all your lipsticks.
● Keep wrapped in saran wrap when not in use.
Company Advantage
• Beyer Machinery's products are sold well in Asia, Europe, and other regions due to their high quality.
• With good location advantages, the open and easy traffic serves as the foundation for Beyer Machinery's development.
• With a professional service team, Beyer Machinery is able to provide all-round and professional services which are suitable for customers according to their different needs.
If you have any questions, feel free to consult us.
{{item.score}} Stars
{{item.pre}}%
{{item.nickname ? (item.nickname.slice(0, 2) + '*****') : item.source === 1 ? 'mall buyer' : '--'}}
{{item.comment_time}} Review in the {{item.country}}
{{itemAttr.params_key}}: {{itemAttr.params_value}}
Contact us
we welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.
you might like
We believe that, with client’s trust and our reponsibility, mutual cooperation and win-win situations are the bridge of friendship leading us to brilliant future! Beyer cosmetic machinery, You deserve it!
LINKS
PRODUCT
CONTACT US
Contact: Nancy Luo
Tel: +86-13729807702
Email: sales@beyer.ltd
Whatsapp: +853-65695128
Add: Room 1112, Building G-1, No.11 XiongFeng North Street, ZhongCun Street, PanYu District, GuangZhou City, GuangDong Province, China.
Postcode:511495